Suneast UXT-450 波峰焊机 (50~450mm, 4350*1580*1750mm)

Dimension：LxWxH(mm)     4350*1580*1750

Weigh:        Approx.1950kg

Power Supply:        3PH 380V 50HZ

Startup Power:        32KW

Operation Powr Consumption:        Approx.8.5kW

Control System:        PC+PLC        

Spraying movement:        Step motor

Spray Pressure:        0.2Mpa-0.4Mpa

Flux Flow Arrange:        Option

Auto Fill Flux:        Standard        

Exhaust:        Top exhaust+Side exhaust

Exhaust Ducting Diameter(mm):        Φ250

Exhaust Capacity:        30m³/min        

Preheating Mode:        Hot air Convection / IR

Control Mode:        PID        

Preheating Zone Number:        3

Preheating Length(mm):        1800

Preheating Temperature:        Room temperature~200℃

Warm-upTime(min):        Approx.12min(setting：150℃)

Blower Motor:        250W  3PH  220VAC

PCB Width(mm):   50-450

Convoyor Direction:        L-R (Option：R-L)

Conveyor Speed(mm/min):        500~1800

Conveyor Height(mm):        750±20

Available Component Heigh (mm):        Top 120 (Option：  250);  Bottom 15

Conveyor Speed Control Mode:        Frequency converter closed-loop stepless speed regulation

Fingers:        Spring tablet finger /D-40 duckbill finger/double hook finger/heavy double hook finger, choose one.

Conveyor Angle:        4-7°        

Type of solder Pot:        Motor drive

Solder Pot Material:        Casting Iron

Wave Height Adjustment:       Frequency converter: computer digital control

Cooling Method:        Forced air cooling, Option: water cooler

Heater Power:        13.5KW        

Solder Pot Temperature:        300℃

Solder Pot Capacity:        Approx.550KG

Wave Drive Power:        180W*2  3PH 220VAC

Solder Pot Warm-up Time:        Approx.150min (setting：250℃)

Temperature Control Mode:        PID

Finger Cleaning System:        Brush