Yokogawa 96066 Clamp-on probe

Measureable conductor size:Max. φ150mm

Measuring range:300 A range: 30 to 300 Arms(424 Apeak), 1000 A range: 100 to 1000 Arms(1414 Apeak), 3000 A range: 300 to 3000 Arms(4243 Apeak)

Output voltage:300 A range: AC 0 to 500 mVrms(1.67 mV/A), 1000 A range: AC 0 to 500 mVrms(0.5 mV/A), 3000 A range: AC 0 to 500 mVrms(0.167 mV/A)

Accuracy (sine wave input):+ Band width:±1.0% rdg(45 to 66 Hz) (measuring at center of the sensor))

+ Phase:±1.0° or less (each measurement range, 45 Hz to 65 Hz)

Temperature & humidity range (guaranteed accuracy):23 ±5°C, 85%RH or less(no condensation)

Current consumption (at power supply 3V):15 mA (at power supply 3 V)

Rated voltage between circuit and ground:AC 600 Vrms max

Operating temperature & humidity range:0 to 50°C, 85% RH or less (no condensation)

Storage temperature & humidity range:-20 to 60°C, 90% RH or less (no condensation)

Temperature coefficient:In the range of 0 to 50°C and the amount of change from 23°C is ±2.5% rdg or less

Maximum allowable input:AC 3600 Arms(45 to 65 Hz)

Influence of the conductor location:Within ±5%rdg

Influence of the external magnetic field:Current that flows through the conductor ±1.0% rdg or less when separated by a distance of D/4 (27 mm) from the conductor

Output impedance:100Ω or less

Withstand voltage:AC5.4kVrms / 5 seconds Between circuit and sensor.

Recommended calibration period:1 year

Environmental condition:Altitude up to 2000 m, in-door use

Dimension:61(W) × 111(H) × 37 (D)mm (excluding projections)

Cable length:Clamp sensor – circuit box: approx 2m Circuit box – output terminal: approx 1m

Output terminal:MINI DIN 6PIN

Weight:Approx.950g

Accessory:Instruction manual, Output cable

Manual: