Yokogawa 96065 Clamp-on probe (0 - 1000Arms)

Measureable conductor size:Max. φ110mm

Measuring range:AC 0 to 1000Arms(1850Apeak)

Output voltage:AC 0 to 500 mVrms (0.5 mV/A)

Accuracy (sine wave input):+ Band width:±0.8% rdg ±0.2 mV(45 to 65 Hz) ±1.5% rdg ±0.4 mV(40 to 1 kHz)

+ Phase:±2.0° or less (45Hz to 65 Hz) ±3.0° or less (40Hz to 1 kHz)

Temperature & humidity range (guaranteed accuracy):23 ±5°C, 85%RH or less(no ondensation)

Current consumption (at power supply 3V):2 mA max. (at power supply ±5 V)

Rated voltage between circuit and ground:AC 600 Vrms max

Operating temperature & humidity range:0 to 50°C, 85% RH or less (no ondensation)

Storage temperature & humidity range:-20 to 60°C, 90% RH or less (no ondensation)

Temperature coefficient:0.03% rdg./°C (-10 to 50°C)

Maximum allowable input:AC 1300 Arms

Influence of the conductor location:Within ±1.5%rdg

Influence of the external magnetic field:Current that flows through the conductor ±2.0% rdg or less when separated by a distance of D/4 (37.5 mm) from the conductor

Output impedance:100Ω or less

Withstand voltage:AC5.4kVrms / 5 seconds Between circuit and sensor.

Recommended calibration period:1 year

Environmental condition:Altitude up to 2000 m, in-door use

Dimension:24(W) × 65(H) × 22(D)mm (excluding projections)

Cable lengthClamp sensor – circuit box: approx. 2.7m Circuit box – output terminal: approx. 0.2m

Output terminal:MINI DIN 6PIN

Weight:Approx.170g

Accessory:Instruction manual, Cable marker

Manual: