Yamato ADL311-A Spray Dryer (0〜0.3MPa)

Temp. adjusting unit setting range: 40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature)

Temperature adjusting accuracy: Inlet temperature±1deg.C

Drying air amount adjusting range: 0〜0.7m3/min

Spray air pressure adjusting range: 0〜0.3MPa

Liquid sending pump flow rate range: 0〜26 ml/min

Spray air line washing function: Spraying at the nozzle tip, manual pulse jet system

External output: Inlet temperature, outlet temperature, temperature outlet (4-20 mA)

Temperature adjusting device: PID digital temperature adjusting device

Touch panel: Blower, heater, liquid sending pump, pulse jet switch, error display

Control select switch: Inlet temperature, outlet temperature control switch (Outlet temp. control is conditional.)

Temperature sensor: K-thermocouple

Heater: 2.0 kW (at 200V) to 2.88 kW (at 240V)

Liquid sending: Fixed amount peristaltic pump

Spraying air pump: Spraying air compressor (sold separately) is used

Service outlet: For stirrer: AC100V, MAX2A

Suction blower: Bypass blower

Filter: Suction filter, exhaust filter

Recovery of solvent: -

Spray nozzle cooling mechanism: Connector: nipple x 2, O.D.:φ10.5 mm

Spray air connection diameter: Nipple diameter:φ7 mm

Spray air pressure: Bourdon tube: 0.3 MPa

Exhaust connecting diameter: φ50mm

Safety function: Inlet/outlet temperature overheat, sample feed reverse rotation mechanism, over current electric leakage breaker, nozzle connection error

External dimensions（W×D×H mm）: 580×420×1125mm

Power Source: AC220V Single phase

Weight: 80kg

Datasheet