Wondery RT3-150-6 Bogie Hearth Heat Treating Car Bottom Furnaces Equipment Electric (650℃)

Application

The RT-780-12 electric car bottom furnace is mainly used for heat treatment processing such as clay pot heating molding

Rated power: based on furnace size (1-100%) adjustable

Power supply: 380V, 3P, 50Hz

Rated temperature: 650℃

Control zone: 1 zone

Effective working size: customized

Heating element connection: Y

Temperature uniformity: ±10℃

Temperature measurement accuracy: ±1℃

Non-load furnace power consumption: ≤18%

Temperature control method: SCR, PID regulator; Shimaden temperature controller with 485 communication interface, 10.1 inch touch screen (it can record historical data, storage process, U disk export, screenshots and other functions, with overtemperature alarm)

Furnace surface temperature rise: ＜35℃

Heating element: 0Cr25AL5 (belt material)

Bogie hearth plate material: CrMnN heat resistant steel, 30mm thick

Loading method: Product loaded on the bogie, and then bogie moves into the furnace

Furnace lining: Standard Refractory fiber

Furnace door opening method: 1Ton electric hoist up-down, sealed by spring

Bogie moving method: By 3KW cycloidal pin gear speed reducer

Fume exhaust port: One piece of φ219mm exhaust pipes are installed on rear wall of furnace body, and the open size is adjustable

2.Structural Introduction

The bogie hearth furnace is mainly comprised of furnace shell, lining, furnace door and door compression system, bogie and bogie traction mechanism, sealing between furnace body and bogie, heating element and fixtures, temperature control system.

2.1 furnace body

The stress relieving car bottom furnace shell is welded with steel plate, the thickness of steel plate ≥3mm. 

2.2 lining

The quenching car bottom furnace body is built with an all-fiber system. 

2.3 furnace door and door up-down system

The quenching bogie hearth furnace door is comprised of all-fiber lining and steel structure casing. The door frame is made of 10mm steel plate. 

Driving method of door: The furnace door is electrically lifted upward and downward by the hoist. And it is sealed by spring.

2.4 bogie, 1 set;  

2.5 heating element

heating element: The 0Cr25AL5 resistance corrugated shape alloy resistance strips are mounted in 2 side walls. 

2.6 electrical control system

Temperature control: The control actuation system is a large-power triggering one complete with a radiator and an air cooling system. There is also an air switch.

The heating loop is equipped with ammeter, voltmeter, heating element on-off indicator, power-on interlock protection,and safe earthing measures.

Movement control: The control system mainly controls the door up-down movement, door compression, and door in-out movement. Also the movements are necessarily linked to ensure the operation safety.