Webtec CT800-J19-S-B-7 Turbine Flow Meter (20-800 lpm; 480 bar)

Main ports: 1-7/8” -12UN #24 SAE ORB

Top ports: 1/4” BSPP

Flow range: 20 - 800 lpm

Max. pressure: 480 bar

Ambient temperature: 5 to 40 °C (41 - 104 °F)

Fluid type: Mineral oil to ISO 11158 category HM (for other fluid types please contact Sales).

Fluid temperature: 5 to 90 °C (41 - 194 °F) continuous use.

Accuracy:

15 to 100% of range - 1% of indicated reading

Below 15% fxed accuracy of 1% of 15% of full scale

Repeatability: Better than ± 0.2%

Response Time: 50ms + 1 period (turbine frequency)

Degree of protection*: IP66 (EN60529) *With cable connected

Bus speed: 250KHz

Electrical specifcation

Supply voltage (VS): 8 - 40 VDC

Current: 5mA @32v, 20mA @8v

Output: SAE J1939 compatible (not fully compliant)

Calibration: Calibrations are conducted at a mean viscosity of 21cSt using ISO32 hydraulic mineral oil to ISO11158 category HM. Calibration certifcates are available on request - this is a chargeable option.

Construction material:

Flow body:

600/800/1500 High tensile Aluminium 2014A T6

15/60/150/300/400 High tensile Aluminium 2011 T6

Internal parts: Aluminium, Steel, Stainless Steel.

Transducer: Body and nut -steel 212A42 electroless nickel plated, Housing and Lid - Aluminium 2011 T3

Seals: FKM seals as standard EPDM are available (For flow meters without loading valve - CT only) - please consult sales offce.

Options: Cables, Splitters and Terminators, Pressure sensor

Datasheet

Manual