Wayne Kerr 6520P High Frequency LCR Meter (20Hz ~ 20MHz)

Measurement Function:

Capacitance (C)

Inductance (L)

Resistance (R)

Reactance (X)

Conductance (G)

Susceptance (B)

Dissipation Factor (D)

Quality Factor (Q)

Impedance (Z)

Admittance (Y)

Phase Angle (Ø)

Frequency Range:

20Hz to 20MHz

Frequency step size: <1 mHz

Accuracy of set frequency: ±0.005"%

AC Drive Level:

10 mV to 1V rms (varies with frequency)

200 µA to 20 mA rms (varies with frequency)

Measurement Speeds:

4 speeds selectable

Up to 20 measurements per second for test frequencies ≧100 Hz

Accuracy:

Dissipation factor - ±0.0005 (1+D^2)

Quality factor - ±0.05 %( Q+1/Q)

Capacitance/ Inductance/ Impedance - ±0.05%

Accuracy varies with frequency, drive level and measured impedance

DC Bias Current (Option):

/D1 0 to +100mA dc bias current and 0 to +40V dc bias voltage

/D2 -40V to +40V dc bias voltage

Power supply. Input voltage 90 V AC to 264 V AC (Autoranging). Mains frequency 47 to 63 Hz

Display: 8.4" VGA (650 x 480) color TFT with touch panel

Printer:

HP-PCL compatible graphics printing (local and network)

Centronics / parallel printer port, Epson compatible text/ticket printing (local)

Remote Trigger: Rear panel BNC with internal pull-up, operates on logic low or contact closure

GPIB Interface: External instrument control 24 pin IEEE 488 connector

USB Interface:

Two Universal Serial Bus (USB) interfaces

USB 1.1 compliant

VGA Interface: 15-way D-type connector to drive an external monitor in addition to the internal screen

Network Interface: 10/100-BASETX Ethernet controller. RJ45 connector

Keyboard Interface: Standard USB or PS/2 keyboard port. Instrument front panel remains active with keyboard plugged in

Mouse Interface: Standard USB or PS/2 mouse port. Touch screen remains enabled when the mouse is connected

Datasheet