UNI-T UTS3084T+ SpectrumAnalyzer (9 kHz-8.4 GHz)

Frequency range : 9 kHz-8.4 GHz

Frequency resolution : 1Hz

Sweep range : 0Hz,100Hz - 8.4GHz

Sweep accuracy : Swept ±[0.25%*Span+Span/(Points-1) ]; FFT ±[0.10%*Span+Span/(Points-1) ]

Sweep time : 1 ms to 4000 s(span≠ 0); 1 μs to 4000 s(span= 0)

Sweep mode : Swept,FFT

Marker mode : Normal, Delta Δ, Fixed

Marker function : Marker Noise, Band Power, Band Density, NdB, Counter

RBW (-3 dB) : 1 Hz-3 MHz,1-3-10 steps

Video bandwidth (VBW): 1 Hz-3 MHz,1-3-10 steps

Selectivity (–60 dB/–3 dB) : <4.8:1 (nominal)(-60dB:-3dB)

Bandwidth accuracy (–3dB) : < 5% (nominal)

Reference level : -100 dBm - +30 dBm,Steps 1 dB

Preamp : 20 dB, Nominal

Input attenuator range: 0-51 dB,1 dB Steps

Maximum input DC voltage : 50 V DC max

Maximum continuous wave RF power: ≤+33 dBm 3 minute,Input attenuation >20 dB

Display log scale: 1 dB to 200 dB

Display linear scale: 0 -Reference level

Scale units : dBm, dBmV, dBuV,V,W

Sweep (trace) point range : 40001

Number of traces : 6

Detection mode : Sample,Peak,Negative,Normal,Average

Trace Type :  Clear/Write,Average,Max Hold,Min Hold

Frequency response: 

Preamp Off :

9 kHz to 3.6 GHz:±0.6 dB;±0.3 dB,Typical;

3.6 GHz to 8.4 GHz:±0.8 dB;±0.6 dB,Typical

Tracking generator: 

Frequency range:  100 kHz-6 GHz

Output level range: -40 dBm-0 dBm

Resolution : 0.5 dB

Flatness output : ±3 dB

Interface : RF input,Trace source output,10MHz reference input, 10MHz reference output,Ext Trigger,HDMI,USB host, USB device,LAN,Headphone Jack

General Characterisitics: 

Power : 100-240V AC, 50Hz/60Hz; 100 to 120 VAC (Fluctuations±10%),400 Hz

Display : 10.1 'TFT LCD (1280x800) touch

Product size(W×H×D) : 378 mm×218 mm×120 mm

Product net weight : 4.55kg

Datasheet