UNI-T UT262E Non-Contact Phase Detector (70-1000VAC, 45~66Hz, 3 phase)

Function/Application: Phase detection, live wire examination, power inspection, phase loss judgment, breakpoints finding, breakpoints positioning.

Measurement method: Non-contact detection

Phase wire position: Put the wires at the position between “▲” and “▼” marked on the clamp

Voltage range: Three-phase voltage, 70-1000V AC （45Hz ～ 66Hz)

Operating frequency: 50Hz/60Hz（±10%

Test method: Non-contact clamping

Power supply: 1.5V AA*2 alkaline batteries

Power consumption: Power-off current is less than 10uA @3V

Low battery indication: <2.4V- The indicator light flashes slowly to indicate low battery.

<2V- The buzzer beeps twice to indicate power off.

Auto power off: After the detector is turned on for about 5 minutes, it will power off automatically and the buzzer will beep twice.

Operating temperature: 32～122°F (0~50°C)

Operating humidity: >85% (Non condensing)

Storage temperature: 4~140°F (-20~60°C)

Altitude: < 2000m

Button life: 10000 cycles

Insulation intensity: 3.7kVrms

Buzzing decibel: 65~70dB

IP rating: IP52

Safety certification: CE, UKCAEN61010-1: 2001, EN61010-031: 2002

Safety rating: Pollution Class 2, CAT Ⅳ (600V), CAT III(1000V), 8000V transient overvoltage (Only for the clamp)

General Characteristics:

Product Color: Red, black

Product weight (include batteries): 237.7g (including batteries); 191.5g (excluding batteries,REF)

Product Dimension: 88mm*30mm*66mm (REF)

Standard accessories:

User manual: 1 pc

Carrying bag: 1 pc

Warranty card: 1 pc

Inspection Certificate: 1 pc

AA alkaline battery: 2 pcs