UNI-T MSO7104X Mixed Signal Oscilloscope (1GHz; 4CH)

Bandwidth : 1GHz 

Channels : 4

Sample rate (analog) : 10GSa/s(single channel), 5GSa/s (dual channel), 2.5GSa/s (full channel)

Sample rate (digital) : 1.25GS/s

Memory depth : 1Gpts(single channel), 500Mpts(dual channel), 250Mpts(full channel)

Max. Waveform capture rate : ≥800,000 wfms/s(UltraAcq®);≥2,000,000 wfms/s (sequence mode)

Time base scale : 100ps/div-1000s/div

Input impedance : 1MΩ ± 1% (15±3 pF), 50Ω ± 2%

Input impedance (digital) : 100kΩ±2%

Vertical scale : 1mV/div-10 V/div (1 MΩ);1mV/div-1V/div (50Ω)

DC gain accuracy : 50Ω:±1.5%(≤5mV/div: ±2.0%)±1% of FS(≤5mV/div:±1.5% of FS); 1MΩ:±1.2%(≤5mV/div: ±1.5%)±1% of FS(≤5mV/Div : ±1.2% of FS)

Serial protocol analysis : Standard configuration: RS-232/422/485/UART, SPI, I2C, CAN, LIN; Optional: CAN-FD, SENT, FlexRay, AudioBus (I2S\LJ\RJ\TDM), MIL STD 1553, ARINC429

Waveform math: Simultaneous support for 8 math waveforms; Enhanced FFT, basic operations, filter, advanced function editor, MATLAB embedded programming operations and render, enhanced resolution;; Histograms, Area histograms, Trend chart, Trace

Auto measurements : >48 , support for parameter snapshots; support for statistical analysis, histograms, trend charts and tracking chart analysis

Number of measurements : Display 10 measurements at the same time

Measurement statistics : Current value, Average value, Maximum value, Minimum value, Standard deviation, Measure the count, Histogram, Trend chart, Trace

Arbitrary waveform generator (optional) : 2CH, 60MHz , 625MSa/s

Frequency counter : 8-bit hardware frequency counter

Digital voltmeter : 4digits,DC/AC RMS/DC+AC RMS

Advanced analysis function : Power Analysis (Optional), Jitter and Eye Diagram Analysis (Optional), Limit Mask Testing, Sequence Mode

Standard interfaces: USB 3.0 Host (4 ports), USB 3.0 Device (1 port, USBTMC Compliant), LAN (10/100/1000Mb/s Base-T Ethernet; LXI Compliant), HDMI, Aux In (Trig In, AWG external trigger input), Aux Out (Trig Out, Pass/Fail, AWG trigger output), 10MHz REF In\Out

General Characterisitics: 

Power : 100V-240V ACrms (±10%), 50Hz/60Hz

Display : 15.6 inch FHD capacitive touch screen, 1920*1080(H*V)

Product net weight : 10.5kg

Product size (W×H×D) : 445mm×302mm×200mm

Standard quantity per carton : 1pcs

Standard Accessories

Power cord conforming to the standard of the destination country

UT-D30: USB3.0 data cable

UT-P07:Passive probe x 4 (1 x, 10 x switchable, 500MHz)

UT-L45: BNC-BNC straight-through cable ×2

Front panel protective cover ×1

Datasheet