Twintex PPS-6010 Adjustable DC Power Supply (60.5V-10.5A)

- Rated output (0 ℃ ~ 40 ℃):

Voltage: 0 ~ 60.5V

Current: 0 ~ 10.5A

Power: 0-600W

O.V.P: 0.1 ~ 64V

O.C.P: 0.1 ~ 12A

- Constant voltage operation:

Current Stabilization: 0.01% + 4mV

Load stability: 0.1% + 5mV

Noise & Noise (20Hz ~ 20MHz): 2mVrms, 30mVpp

Recovery time: 1.5ms (50% load change)

Temperature coefficient: 100ppm/

- Continuous current operation:

Current Stabilization: 0.1% + 3mA

Load stability: 0.1% + 5mA

Noise & Noise: 10mArms

- Display:

Voltmeter: 5 digit LCD display

Ammeter: 5 digit LCD display

Set resolution: 1mV / 1mA

Read resolution: 1mV / 1mA

- Setting accuracy (25 ± 5 ℃):

Voltage: ± (0.03% of reading + 10mV)

Current: ± (0.1% of reading + 0.1% FS)

Reading accuracy (25 ± 5 ℃):

Voltage: ± (0.02% of reading + 5mV)

Current: ± (0.1% of reading + 0.1% FS)

- General parameters:

Protection: Overload, over voltage, over current, over temperature and reverse polarity protection

Panel lock: Provided

Remote sensing function: Maximum offset voltage 5% FS

Battery charging: Lithium battery curve charge

- Interface:

RS232 interface, Support SCPI . commands

Analogue control 0-5V

Optional RS485 interface, support ModBus

Optional RS232 to USB cable

- Memory: 300 internal storage, USB flash driver support

- Insulation material:

Between base and terminal: 20MΩ / 500VDC

Between base and AC line: 30MΩ / 500VDC

- Operating environment:

Indoor use

Altitude: 2000m

Ambient temperature: 0 ~ 40

Relative humidity: 80%

Installation category: II

Pollution level: 2

Storage environment: -10 ~ 70 , 70% RH

Power source: AC220V ± 10%, 50 / 60Hz

Dimensions (WxHxD): 215x89x352mm

Weight: 4.5kg