TSI 8048 Respirator Fit Tester (1 ~ >10,000 (1 ~ 200 for N95))

To prevent the text from bunching up into a single paragraph when you copy it, I have removed all special formatting (no bolding, no bullets).

Fit Factor Range: 1 to >10,000 (1 to 200 for N95 masks)

Tested Facepieces: Full/Half-face elastomeric; NIOSH 95/99/100; FFP1/FFP2/FFP3

Measurement: Direct measurement of fit factor (Cout/Cin)

Dimensions: 12 cm x 27 cm x 24 cm

Weight: 3.2 kg (Unit only); 6.9 kg (With case and accessories)

Power: 100 to 250 VAC, 50 to 60 Hz (autosensing)

Sample Flow Rate: 350 cm3/min

Total Flow Rate: 1000 cm3/min (nominal)

Operating Temperature: 0 to 38 degrees C (32 to 100 degrees F)

Storage Temperature: -40 to 50 degrees C (-40 to 122 degrees F)

Working Fluid: 99.5 percent reagent grade isopropanol

Operating Time: 6 hours of continuous testing (at 21 degrees C)

Carrying Case Dimensions: 25.4 cm x 52.1 cm x 39.4 cm

Pass/Fail Setting: User-selectable (0 to 10,000)

Communications: WiFi, USB-C, USB-A

Software: FitPro Ultra Fit Test Software

Datasheet