Texio DCS-9707 digital oscilloscope (4 Channels, 70Mhz, 2Gs / s)

Resolution 8 bit @1MΩ: 1mV*~10V

*: When the vertical scale is set to 1mV/div, the bandwidth limit will be set

to 20MHz automatically.

Input Coupling AC, DC, GND

Input Impedance 1MΩ // 16pF

DC Gain Accuracy* ± (5% × |Readout| + 0.1div + 1mV) when 1mV/div is selected

±(3% × |Readout| + 0.1div + 1mV) when 2mV/div or greater is selected

*: The measurement type is average of ≥ 16 waveforms with the vertical

position at zero

Polarity Normal & Invert

Maximum Input Voltage 300V (DC+AC Peak), CAT I

Oset Position Range 1mV/div ～ 20mV/div: ±0.5V

50mV/div ～ 200mV/div: ±5V

500mV/div ～ 2V/div: ±25V

5V/div ～ 10V/div: ±250V

Waveform Signal Process +, -, ×, ÷, FFT, FFTrms, d/dt, ∫dt, √

FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS,

and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.

Trigger

Source CH1 ,CH2, CH3, CH4, Line, EXT, D0-D15

Trigger Mode Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single

Trigger Type Edge, Pulse Width, Video, Pulse Runt, Rise & Fall, Timeout, Alternate, EventDelay(1~65535 events), Time-Delay(10nS~10S), Logic*, Bus**with Logic

Analyzer Option

Holdo range 10nS to 10S

Coupling AC,DC,LF rej. ,Hf rej. ,Noise rej.

Sensitivity DC ~ 100MHzApprox. 1div or 1.0mV

100MHz ~ 200MHzApprox. 1.5div or 15mV

200MHz ~ 300MHzApprox. 2div or 20mV

External Trigger

Range ±15V

Sensitivity DC ～ 100MHzApprox. 100mV

100MHz ～ 200MHzApprox. 150mV

200MHz ～ 300MHzApprox. 150mV

Input Impedance 1MΩ// 16pF

Horizontal

Time base Range 1ns/div ~ 100s/div (1-2-5 increments)　　ROLL: 100ms/div ~ 100s/div

Pre-trigger 10 div maximum

Post-trigger 1000 div maximum.

Accuracy ±20 ppm over any ≥ 1 ms time interval

Real Time Sample Rate 1CH: 2GSa/s 2CH: 1GSa/s

ET Sample Rate 100GSa/s maximum

Record Length 1CH: 2Mpts(10div)　　2CH: 1Mpts(10div)

Acquisition Mode Normal, Average, Peak Detect, Single

Peak Detection 2nS (typical)

Average Selectable from 2 to 256

X-Y Mode

X-Axis Input Channel 1; Channel 3*

Y-Axis Input Channel 2; Channel 4*

Phase Shift ±3° at 100kHz

Cursors and Measurement

Cursors Amplitude, Time, Gating available

Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS,

Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot,

Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses,

-Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase

Cursors measurement Voltage dierence between cursors ( ∆V)

Time dierence between cursors ( ∆T)

Auto counter 6 digits, range from 2Hz minimum to the rated bandwidth

Multi-language menu Available

Time clock Time and Date ,Provide the Date/Time for saved data

Dimensions 380mmX220mmX145mm

Weight 4.2kg

Accessory AC Power cordx1, Probe x4 or x2, ACCESSORY CD-ROMx1, USING THE

PRODUCT SAFTYx1

Download datasheet