Texio DCS-1104B digital oscilloscope (4 Channels, 100Mhz, 1Gs / s)

Resolution 8 bit @1MΩ: 1mV~10V

Input Impedance 1MΩ // 16pF

DC Gain Accuracy 1mV: ±4% full scale, >2mV: ±3% full scale

Waveform Signal Process +, -, ×, ÷, FFT, FFTrms, User Dened Expression

FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT

Window to Rectangular, Hamming, Hanning, or Blackman-Harris

Trigger

Source CH1, CH2, CH3*, CH4*, Line, EXT**

*four channel models only. **two channel models only.

Trigger Type Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Timeout, Alternate,

Event-Delay(1~65535 events), Time-Delay(Duration, 4nS~10S), Bus

Coupling AC, DC, LF rej., Hf rej., Noise rej.

Sensitivity 1div

External Trigger

Range ±15V

Sensitivity DC ~ 100MHz Approx. 100mV

Horizontal

Time base Range 5ns/div ~ 100s/div (1-2-5 increments) ROLL: 100ms/div ~ 100s/div

Pre-trigger 10 div maximum

Post-trigger 2,000,000 div maximum.

Real Time Sample Rate 1GSa/s max.

Record Length Max. 10Mpts

Acquisition Mode Normal, Average, Peak Detect, Single

Peak Detection 2nS (typical)

Average selectable from 2 to 256

X-Y Mode

X-Axis Input Channel 1; Channel 3* *four channel models only

Y-Axis Input Channel 2; Channel 4* *four channel models only

Phase Shift ±3° at 100kHz

Cursors and Measurement

Cursors Amplitude, Time, Gating available; Unit: Seconds(s), Hz(1/s), Phase(degree), Ration(%)

Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS,

Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period,

RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR,

FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase

Control Panel Function

Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger

systems, with undo Autoset

Save Setup 20set

Save Waveform 24set

Display

TFT LCD Type 7”TFT WVGA color display 800 horizontal × 480 vertical pixels (WVGA)

Waveform Update Rate 50,000 waveforms per second, maximum

Interface

USB Port USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1

Ethernet Port (LAN) RJ-45 connector, 10/100Mbps with HP Auto-MDIX (4ch Model Only)

General

Dimensions 384mmX208mmX127.3mm

Weight 2.8kg

Power Source 100V~240V AC, 50Hz~60Hz, Auto selection, Power consumption: 30 Watts

Download datasheet