TAITEC SDminiN Unit Water Bath (5℃~+80℃; -20℃ ~ +80℃; ±0.1ºC)
Temperature range (*1): +5℃ above RT to +80℃ (*2)
Settable temp. range (*3): -20℃ to +80℃
Temp. control accuracy (*4): ±0.1℃
Stirring method in Bath: Jet flow
Temperature display: Digital (Changeable Preset/Current value)
Timer: Buzzer notification for Preset time Operation OFF Each Setting range: 1 min to 99 h 59 min
Other functions: Buzzer notification when Preset temp. is reached, Automatic tuning
Minimum Water level: 45 mm from the bottom of the bath
Heater: 500 W (Time proportional output variable)
Safe devices/protections: Circuit protector, Fuse, Dry-heating protection with float,Heater protection cover, Sensor error, Short circuit, High/Low temp. sample protection, Water level alarm, Non-volatile memory error, Automatic tuning error, Alarm setting error
Power failure: Switchable Automatic/Manual recovery
Dimensions inside Bath(W×D×H): 180 × 237 × 155 mm (Occupancy Dim.: 190 × 83 × 147 mm)
Main unit dimensions(W×D×H): 220 × 127 × 235 mm(When Bath C-type is used: 220 × 398 × 262 mm)
Weight: Approx. 3 kg
Power supply/consumption:
AC100V/5.5A (Need a step-down transformer)
75 Wh at 37℃ (46 Wh when Hood used) (*5)
Standard accessories: Plastic Water bath C-type × 1 pc (*2)
Catalog
(*2)As the Max. Heat-resistant temperature of bath C-type is up to 70℃, you can use the optional stainless steel insulated bath F-type for above 70℃.
(*3)Not equipped with a cooling function. Can be used together with our Chiller/Coolnit, Immersion cooler, etc. at below RT (25℃).
(*4)The value under the conditions of RT (25℃), AC 100 V/50 Hz,
(*5)The reference value when the Plastic Water bath C-type and optional Heat-resistant Plastic Hood PF-SDM at each preset temp. used under the condition of *4.
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts