SCHMIDT ETB-500 Tension Meter (2.0 – 500.0 cN)

Measuring Range: 2.0 – 500.0 cN

Resolution: 0.1 cN

Measuring Head Width*: 24 mm

SCHMIDT Calibration Material: PA: 0.20 mm Ø**

Calibration: According to SCHMIDT factory procedure

Accuracy: ±1 % full scale ±1 digit or better; typical ±0.5 % full scale

Measuring Units: cN, g, N or lb, switchable

Overrange: Approx. 10 % full scale, without accuracy guarantee

Overload protection: 200 % full scale

Measuring principle: Strain gauge bridge

Measuring roller deflection: Max. 0.5 mm

Signal processing: Digital

Damping: Adjustable electronic damping, averaging

Sampling rate internal: Approx. 1 kHz

Sampling rate: Max. 200 Hz (200 readings/sec)

Display: Colour-TFT 128 x 160

Display update rate: Approx. 2 times per second

Memory: Last, average, MAX and MIN

Auto power off: Approx. after 3 minutes of non-use

Temperature coefficient: Gain: less than ± 0.01% full scale/°C

Temperature range: 10 – 45 ºC

Air humidity: 85 % RH, max.

Power supply: LiPo accumulator (approx. 20 h continuous use, charging time approx. 3.5 h), USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)

Housing material: Aluminium

Dimensions: See Dimensions

Weight, net (gross): Approx. 310 g (1220 g)

* Outer distance between outside guide rollers

** Suitable for 95 % of applications – PA = Polyamide Monofilamente, calibrated with a running filament approx. 100 m/min

*** Suitable for 95 % of applications – PA = Polyamide Monofilamente, calibrated with a static filament

Delivery Includes: carrying case, USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ), USB cable, a screwdriver and flat wrench, operating instruction in German or English (as requested), Certificate of Compliance with the order 2.1 according EN 10204 free of charge. Tension meter ETX includes additionally software »Tension Inspect 3«

Dimensions

Manual