Schloeder SFT 2400 Burst Generator (125kHz, 100V-5000V)

Burst Generator

Burst frequency: Single pulse up to 125 kHz

Pulse voltage: 100 V - 5000 V

Polarity burst packet: pos., neg., alternating

Pulse shape: acc. to IEC 61000-4-4

Max. pulses / sec: 5000 (up to 2 kV)

3000 (up to 3 kV)

1500 (up to 5 kV)

Max. pulse / packet: 500

Interface USB (virtual COM port)

optional: optical (Toshiba LWL)

Operating temperature: 0 - 40 °C

Dimensions: 19 housing (3 RU)

Weight: 9 kg

Supply voltage: 100-240 V / 47-63 Hz

Options

CWG 520 3-ph. coupling network 4 x 16 A, burst and surge

CWG 523 3-ph. coupling network 4 x 32 A, burst and surge

CWG 524 3-ph. coupling network 4 x 60 A, burst and surge

CWG 524-B 3-ph. coupling network 4 x 60 A, burst

SFT 470 Probe set for magnetic field

SFT 415 Coupling clamp

SFT 415-1 Capacitive coupling clamp with hood

SFT 430 HV cable for coupling clamp 1 m

SFT 415-CS Calibration set coupling clamp

SFT 450-1 50 Ω attenuator, divider 500:1

SFT 450-2 1000 Ω attenuator, divider 1000:1

SFT 450-Set 50 + 1000 Ω attenuators, necessary for independent verification of the

burst impulse at the generator or coupling clamp SFT 415

ZUB LWL OPTO-MOD Optic interface with 2 connectors for optic fiber cables (retrofit)

ZUB LWL OPTO-MOD-N Optic interface with 2 connectors for optic fiber cables

(upon ordering a new equipment)

ZUB LWL USB-ADAPTER Optic fiber cable, 5 m, USB to optic interface connector

ZUB LWL-100 Optic fiber cable, 1 m, optic interface connector on both sides

ZUB LWL_30 Optic fiber cable, 30 cm, optic interface connector on both sides

EMV-SOFT Control software for burst etc.

Datasheet