Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
The new HygroFlex5-EX series is the latest development in two-channel transmitters for the exact measurement of humidity and temperature in explosive atmospheres. This device conforms to the latest international
standards. The HF5-EX series consists of a robust aluminium transmitter with or without display. The attached probes are cast into a stainless steel tube, and are certified for operation in Zone 0/20. The transmitter itself is
certified for Zone 1/21.
Features
• Measurement of relative humidity and temperature, optional output of dew point and other calculated parameters
• Safe operation in areas with explosion risk
• Intrinsically safe electrical probe
• Interchangeable stainless steel probes
• Robust aluminium housing
OPERATING RANGE: -40…60 °C / -10…60 °C (Models with display) 0…100 %rh, non-condensing
ACCURACY AT 23 ±5 °C: ±0.8 %rh / ±0.1 K
MEASURING RANGE WITH INTERCHANGEABLE PROBE: 0…100 %rh and -40…85 °C
ACCURACY ANALOG OUTPUT: <20 μA
POWER SUPPLY: 10…28 VDC
CURRENT CONSUMPTION: 2x24 mA start up / 2x20 mA operation
HUMIDITY SENSOR: Probe dependent
TEMPERATURE SENSOR: Probe dependent
PSYCHROMETRIC CALCULATIONS: All psychrometric values
NUMBER OF PROBE INPUTS: 1
START-UP TIME: Standard cold <60 s / warm <30 s
MEASUREMENT INTERVAL: 20…240 s
DISPLAY TYPE: Optional graphics display. Presentation configurable.
BACKLIGHT: without Backlight
TREND INDICATOR:Yes, for models with display
PROBE ADJUSTMENT BY SOFTWARE: Not via device menu (only outside the explosive zone with HW4 + AC3001)
FIRMWARE UPDATE: With internet and HW4 software
USER INFORMATION: from Software HW4 (devicemanager)
DATA PROCESSING VIA HW4: Graphics, statistics, analysis, qualification, etc.
CIRCUIT TYPE: 2 wire
ANALOGUE OUTPUTS SCALEABLE BY THE USER: Yes
ANALOG OUTPUT SIGNAL (STANDARD): 4…20 mA, two-wire
GALVANIC SEPARATION OUTPUT SIGNALS: Yes
SERVICE INTERFACE: UART (internal in device)
PROBE MATERIAL: Stainless steel
ENCLOSURE MATERIAL: Aluminium (DIN EN 1706 EN AC-AlSi 12 (Fe))
CABLE CONNECTIONS:
Connections: Ex-e terminals (0.2…2.5 mm2)
Cable gland: 16 x 1.5 (Ø cable 4.5…7 mm)
IP PROTECTION RATING: IP66
FDA/GAMP COMPATIBILITY: FDA 21 CFR Part 11 and GAMP compatible
CE / EMC CONFORM: 2014/30/EU
ATEX DIRECTIVES: 2014/34/EU (ATEX) CSA22.2, UL 508
EX IDENTIFICATION:
EX II 2(1) G Ex eb mb [ia Ga] IIC T5 Gb
EX II 2(1) D Ex tb [ia Da] IIIC T80°C Db
IDENTIFICATION EX NORTH AMERICA:
Class I, Div 1/2, Groups ABCD T5…T4,
Class II, Div 1/2, Groups EFG T80°C…T110°C
Ex e mb [ia Ga] IIC T5...T4 Ga/Gb
Ex tb [ia Da] IIIC T80°C…T110°C Da/Db
Class I, Zone 0/1, AEx e mb [ia Ga] IIC T5…T4 Ga/Gb
Class II, Zone 20/21, AEx tb [ia Da] IIIC T80°C…T110°C Da/Db
DIMENSIONS: 160 x 100 x 61 mm
