Pintech MSD6360 Spectrum Analyzer (9kHz-3.6GHz)

Frequency Range: 9kHz~3.6GHz

Frequency Resolution: 1 Hz

Frequency Span: 0 Hz, 100 Hz to maximum frequency of instrument

Internal reference source:

Frequency: 10 MHz

Accuracy: ±[(Time since last calibration frequency aging rate) Temperature stability Initial accuracy]

Stability: <0.5 ppm (0°C to 50°C, The benchmark is:25°C)

Aging rate: <1ppm/yesrs

Single-sideband phase noise (20°C to 30°C, fc=1GHz, RBW=1kHz, VBW=1kHz) SSB Phase Noise

Carrier offset:

10 kHz< -106 dBc/Hz (typical)

100 kHz< -104 dBc/Hz (typical)

1 MHz< -115 dBc/Hz (typical)

RBW(-3dB): 1Hz to 1MHz(1-3-5-10 Stepping)

RBW accuracy: <5%, nominal value

Resolution filter form factor (60dB:3dB): <5 nominal value

VBW: 10Hz to 3MHz(1-3-5-10 Stepping)

Amplitude and electric level:

Amplitude measurement range: DANL to 20 dBm, 100 MHz to 3.6GHZ, preamp off

Reference electric level: - 80 dBm to +30 dBm, Stepping 0.01 dBm

Sweep time:

Non-zero sweep width: 10ms to 3000s

Zero sweep width: 33.33us~3000s

Sweep mode: continuous, single

Catalogue