PEGO IPX56BS-1400L IPX5 and IPX6 Automatic Water Jet Nozzles Test Chamber (1180*1180*1000, 4000*1450*1850)

Inner size (mm): 1180*1180*1000

Outer size(mm): 4000*1450*1850

Diameter of turntable: Φ600mm

Delivery rate (IPX5): 12.5L/min±0.625

Delivery rate (IPX6): 100L/min±5

Turntable bearing: 50KG (max)

Inner diameter of nozzles: Φ6.3mm (IPX5), Φ12.5mm (IPX6)

Test distance: 2.8m

Working power: 380V/50Hz

Power supply for specimen: 220V

Control system: PLC+7 inch touch screen

Protection: Electric leakage, hydropenia, short circuit

The IPX5 and IPX6 tests are made by spraying the enclosure from all practicable directions with a stream of water from standard test nozzles, the test nozzles (hose nozzles) with Φ6.3mm and Φ12.5mm diameter are strictly designed according to IEC60529 figure 6.

IPX5 and IPX6 water ingress protection testing equipment is consisted by test tunnel and test chamber. Test nozzles are placed at the test tunnel with a distance of 2.8m from the center of the turntable, the turntable is inside the test chamber, the test nozzles can swing up and down to spray the enclosure from all practicable directions automatically. Built-in water tank and the water can be recycled, the test is controlled by PLC and touch screen, the delivery rate is 12.5L/min±5% for IPX3 test and 100L/min±5% for IPX4 test, the water pressure should be adjusted to achieve the specified delivery rates, test duration per square meter of enclosure surface area likely to be sprayed for 1 min, minimum test duration is 3min.