PCE FB 100TW Torque Mete (10 Nm, 0.01Nm, ± 0,5%)

Specifications

Measurement range / resolution: 10 Nm (1 kgfm) / 0.01 Nm

Accuracy:±0.5 % of measurement range

Units of measurement:Nm, Ncm, kgfm, lbfin, gfm

Calibration:possible with external F2 weights

Max. Overload:50 % of measurement range

Sampling rate:freely adjustable up to 1,000 values / s

Functions:PEAK function (MIN - MAX Hold) / limit value measurement / real-time measurement with software

Displaygraphical LC display: 61 x 34 mm / automatic display alignment / backlight

Menu:multilingual: German / English / Spanish

Memory:internal memory and mini SD card memory.

(internal memory is limited to a series of measurement of up to 6,400 measurements)

Storage:

manual - by keystroke

automatic - (adjustable)

Interface:serial RS-232, 9-pole and USB

OPTIONAL: switch contact output

MIN / MAX / OK (see below) + 1 input

Software:incl. downloadable PC software for evaluation and control

Operating conditions:- 10 ... +40 °C

Power supply:4 x Ni-MH 2700 mAh AA rechargeable batteries (exchangeable) or mains adaptor ~230 V/12 V; 1.2 A incl.

Auto Power Off function adjustable

Battery life:approx. 20 hours (without backlight approx. 45 h)

Dimensions evaluation unit:210 x 110 x 40 mm / 600 g

Dimensions torque transducer:

up to 10 Nm Ø 90 (Ø 40) / 80 mm / 700 g

above 10 Nm 1500 g Ø 75 / 90 mm / 1500 g

Cable length of external torque measuring cell:approx. 2 m

Delivery contents

1 x torque wrench tester

1 x external torque transducer

1 x RS-232 data cable

1 x SD Memory Card incl. Reader

4 x AA batteries

1 x mains adaptor

1 x Carrying Case

Manual