OMEGA SYS/FP7002A/FP7025-GI Paddlewheel Flow & Temperature Meter (± 2 %, 93 °C, 285 GPM, 2 1/2 in, NPT Female, 12 to 18 Vdc)

Accuracy: ± 2 %

Output Detail: current

Pressure Type: Gauge

Supply Current: 50 mA max

Supply Voltage: 12 to 18 Vdc

Viscosity Range: 5 cPs

Electrical Output: 4 to 20 mA

Enclosure Ratings: IP65, NEMA Type 4

Materials, Wetted: Brass, FKM, Galvanized Iron, Polypropylene

Supply Power Note: 12 to 18 Vdc @ 50 mA maximum

Pressure Drop Note: max pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig maximum

Pressure Drop, Max: 1.1 psi

Repeatability Error: ±1%

Loop Resistance, Max: Ω = (V supply–12V)/0.02 A

Temperature Accuracy: ± 1.7 °C

Center-to-Center Length: 62.5 in

Operating Pressure Note: Do not exceed maximum ratings of the piping. Depending on the material of the fitting, the operating temperature/pressure may be limited by the piping and not by the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) or 30 psig @ 60°C (140°F), owing to thesert the tee. FP7000 sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig maximum

Operating Pressure, Max: 150 psi

Operating Pressure, Min: 0 psi

Process Connection Size: 2 1/2 in

Process Connection Type: NPT Female

Process Temperature, Max: 93 °C

Process Temperature, Min: 0 °C

Volumetric Flow Rate, Max: 285 GPM

Volumetric Flow Rate, Min: 15 GPM

Operating Temperature, Max: 100 °C

Operating Temperature, Min: 0 °C

Material Construction Option: Galvanized Iron Fittings

Datasheet