OMEGA PX5000L1-1.5KGV Pressure Transducers with High Shock and Vibration Resistance (Gauge, 1500 psi, AS5205/MS33656-4 Male, 7/16 in)

MTBF: 100,000 hours

Shock: Qualification level of 100 g, 11 ms, half sine wave without damage

Weight: 145 g

Accuracy: ± 0.15 %

Stability: ± 0.1%

Vibration: At 35 g peak sinusoidal vibration from 10 Hz to 2000 Hz (1⁄2” D.A.), the output shall not exceed 0.04% FSO/g for 15 psi range to 0.003% FSO/g for 1000 psi and above

Applications: Aeronautics and Aerospace, Automotive, Specialty Equipment

Accuracy Note: Combined linearity, hysteresis and nonrepeatability: ± 0.10% FSO 0 to 15 through 0 to 999 psi; ± 0.15% FSO 1000 psi and above

Output Signal: Millivolt

Pressure Note: 2 times rated pressure or 15,000 psi, whichever is less, will not cause changes in performance beyond the specified tolerances

Pressure Type: Gauge

Pressure, Max: 1500 psi

Pressure, Min: 0 psi

Accuracy Class: 0.1% to 0.25%

Burst Pressure: 3x Full Scale

Stability Note: Calibration Stability: ± 0.1% for 18 months

Supply Voltage: 10 Vdc

Sensing Element: 4-active-arm Strain Gauge Bridge

Input Resistance: 2500 Ω typical, 800 Ω minimum, 3000 Ω maximum

Mating Connector: MIL-26482-I 10-6S

Electrical Output: 30 mV/V

Materials, Wetted: 15-5 PH Stainless Steel, 17-4 Stainless Steel

Output Resistance: 2500 Ω typical,800 Ω minimum, 3300 Ω maximum; for 350 Ω bridge,see Custom Configurations

Relative Humidity: Qualified per MIL-STD-810

Supply Power Note: Electrostatic Discharge: Protected to 15 kV

Burst Pressure Note: 3 times rated pressure or 20,000 psi, whichever is less, will not cause rupture of the pressure containment cavity

Sensing Element Note: 4-active-arm bridge using sputter-deposited thin-film elements

Electrical Connection: MIL-26482-I 10-6P

Insulation Resistance: 500 MΩ

Electrical Output Note: 30 mV typical, 26 mV minimum

Process Connection Size: 7/16 in

Process Connection Type: AS5205/MS33656-4 Male

Operating Temperature, Max: 150 °C

Operating Temperature, Min: -54 °C

Compensated Temperature, Max: 121 °C

Compensated Temperature, Min: -54 °C

Thermal Effect on Span error, Max: ± 0.005% FSO/°F

Thermal Effect on Zero error, Max: ± 0.005% FSO/°F, ± 0.005% FSO/°F

Datasheet