OMEGA OM-CP-HITEMP140-M12 High Temperature Data Logger With Integral M12 Connector (Temperature, USB, ± 0.1 °C)

Height: 54.5 mm

Memory: 43690

Weight: 85 g

Diameter: 24.6 mm

Stop Modes: Adjustable Delay Stop, Manual Through Software

Calibration: Digital calibration through software

Form factor: Handheld

Samples,Max: 43690

Start Modes: Adjustable Delay Start, Immediate Start

Battery life: up to 2 yr

Sampling Rate: 4 Hz (4 updates/second)

Time Accuracy: ± 1 minute/month at 25°C (77°F)

Data Interface: USB

Measurement Type: Temperature

Enclosure Ratings: IP40

Materials, Wetted: Stainless Steel

Supply Power Type: Battery

Sampling Rate Note: 4 readings per second up to 1 reading every 24 hours

Data Interface Note: OM-CP-IFC400 or OM-CP-IFC406 USB docking station required; 125,000 baud

Real Time Recording: May be used with PC to monitor and record data in real time

Temperature Accuracy: ± 0.1 °C

Battery Size and Type: 3.6V Li-ion

Electrical Connection: M12 4 pin Female

Number of Measurements: 1

Relative Humidity, Max: 1

Relative Humidity, Min: 0%

Software Compatibility: XP SP3/Vista/7 and 8 (32-bit and 64-bit)

Temperature Resolution: 0.01 °C

Temperature Sensor Type: RTD

Operating Temperature, Max: 140 °C

Operating Temperature, Min: -40 °C

Temperature Resolution Note: 0.0001 Ω; 0.01°C (0.018°F) (probe dependent)

Temperature Measurement Note: 18 to 400 Ω; -200 to 850°C (-328 to 1562°F) (probe dependent)

Temperature Measurement, Max: 850 °C

Temperature Measurement, Min: -200 °C

Temperature Sensor Type Note: Pt100 RTD probe with M12 connector (probe sold separately)

Readings in Trigger Settings Mode: 18,724 readings

Calibrated Accuracy Temperature Range: -200 to 265 °C

Datasheet