OMEGA FMG71B-A Pulse or Current Output Low Flow Electromagnetic Flow Meter (± 1.5 %, 90 °C, 7.93 GPM, 1/2 in, NPT Male, PEEK, Aluminum, 24 Vdc, M12 4 pin Female)

Accuracy: ± 1.5 %

Materials: PEEK, Aluminum

Conductivity: 50 µS/cm

Current, Max: 26_ma_approx

Accuracy Note: ± 1.5% of reading ± 0.3% range

Output Detail: Amplified Square Wave

Output Signal: Current

Repeatability: ± 1%

Response Time: < 500 ms

Supply Voltage: 24 Vdc

Flange Diameter: 0.39 in

Flow Indication: LED Green

Load Resistance: 250 Ω

Sensor Diameter: 0.25 in

Enclosure Ratings: IP65, NEMA Type 4X

Materials, Wetted: EPDM, Stainless Steel

Number of Outputs: 1

Power Consumption: 150 mA

Supply Power Note: 24 Vdc ± 10%

Supply Power Type: DC

Media Compatibility: Acid Solutions, Conductive Liquids, Saltwater

Flow Indication Note: flow proportional blinking

Electrical Connection: M12 4 pin Female

Output Pulse Rate Note: Square wave signal NPN, internal pull-up resistor 2 kΩ pulse duty ratio 50:50

Operating Pressure, Max: 232 psi

Process Connection Size: 1/2 in

Process Connection Type: NPT Male

Short-Circuit Protected: < 30 V

Process Temperature, Max: 90 °C

Process Temperature, Min: 0 °C

Volumetric Flow Rate, Max: 7.93 GPM

Volumetric Flow Rate, Min: 0.13 GPM

Operating Temperature, Max: 70 °C

Operating Temperature, Min: 5 °C

Short-Circuit Protected Note: Measures short-circuit proof (up to 30V) and polarity protection (up to -30V)

Datasheet