OMEGA DPS20-HV-RTU Strain Meter - 6 Digit Display with 3 Relay Outputs (Strain, Strain, 1/8 DIN, 85 to 265 Vac/Vdc)

Width: 3.48 in

Height: 1.89 in

Length: 3.58 in

Weight: 150 g

Accuracy: ± 0.05 %

Mounting: Panel

Input Type: Strain

Form factor: 1/8 DIN

Power Wires: max. 2.5mm²

Display Note: Digits: 6; Reading: 999999/-199999; Decimal Point: Configurable; LED color: Red Digit; Height: 14mm (0.55’’)

Display Type: LED

Output Signal: N/A

Sampling Rate: 60 Hz (60 updates/second)

Step Response: 17, 20 or 63 mSec (0% to 99% of signal)

Control Output: N/A

Data Interface: RS485

Load Cell Type: 1 mV/V, 2 mV/V, 3 mV/V

Supply Voltage: 85 to 265 Vac/Vdc

supply-voltage: 85 to 265 Vac/Vdc

Impedance Input: 20 MΩ

Number of Cells: 1 to 8 load cells (at 5 Vdc) and 1 to 4 load cells (at 10 Vdc)

Number of Wires: 4, 6

External Contact: Configurable Functions

Input Range Note: 100mV, 30mV, 20mV, 15mV, 10mV, 5mV

Measurement Type: Strain

Number of Digits: 6

Number of Inputs: 1

Number of Relays: N/A

Cutout Dimensions: 1.74 x 3.63 in

Enclosure Ratings: IP65, NEMA Type 4

Power Consumption: 1.5 W 4 W

Sensor Excitation: 5 Vdc or 10 Vdc (configurable), Maximum Exc. Current: 140 mA, Maximum Vdc at Input: ± 30 Vdc

Supply Power Type: AC/DC

Thermal Stability: 50ppm/°C

Step Response Note: 17, 20 or 63 mSec (Configurable)

Data Interface Note: Module-RTU Type of bus: RS-485, up to 57.6 Kbps, Accuracy: 0.1% FS, Isolation: 1000Vdc, Terminal: plug-in screw terminal, pitch 5.08mm, Installation allowed at: Opt.1, Opt.2 and Opt.3

Input Configuration: Front Keypad

Electrical Connection: Screw Terminal

Power Consumption Note: <1.5W (meter only) and <4.0W (meter with output options)

Acquisitions per Second: 16, 50 or 60 acq./sec. (configurable)

Storage Temperature, Max: 70 °C

Storage Temperature, Min: -20 °C

Operating Temperature, Max: 50 °C

Operating Temperature, Min: 0 °C

Datasheet