OMEGA CNITH-I16D33-5-EIT-DC 1/32, 1/16, and 1/8 DIN Humidity and Temperature Controllers (4 Digit LED, Ethernet, 1/16 DIN)

Input Type: Digital

Form factor: 1/16 DIN

Samples,Max: 2/sec

Display Size: 10.2 mm (0.40 in)

Display Type: 4 Digit LED

Probe Length: 127 mm

Ramp and Soak: Single Ramp & Soak

A/D Conversion: A/D Conversion: 12-bit RH and 14-bit temp Reading,Rate: 2 samples per sec max,Digital Filter: Programmable Decimal Selection: None, 0.1 for temperature and humidity

Control Action: Action: Reverse (heat) or direct (cool)

Control Output: 2 SPDT Relay

Data Interface: Ethernet

Supply Voltage: 20 to 36 Vdc

Measurement Type: Temperature, Humidity

Number of Inputs: 2

Display Type Note: Display: 4-digit, 9-segment LED i32, i16D, i8DV: 10.2 mm (0.40") i8: 21 mm (0.83") i8DH: 10.2 mm (0.40") and 21 mm (0.83") RED, GREEN and AMBER programmable colors for process variable, setpoint and temp units

Enclosure Ratings: IP65, NEMA Type 4X

Number of Outputs: 2

Relative Humidity: 90% RH non-condensing

Supply Power Note: Low voltage power option: 20 to 36 Vdc, 24 Vac ±10%; 12 to 36 Vdc, 24 Vac ±10% for iTH-32

Supply Power Type: DC

Data Interface Note: Ethernet: Standards compliance IEEE 802.3 10Base-T

Additional Features 1: 5 inch Probe

Probe Dimensions Note: 127 mm (5") probe for iTH with 3 m (10') cable

Operating Temperature, Max: 50 °C

Operating Temperature, Min: 0 °C

Datasheet