OMEGA CDE-440-01T Conductivity or Resistivity Sensor (Conductivity, 200 °C)

Weight: 1.3 kg

Frequency: 50/60Hz

Impedance: 600 Ω

Resistance: 10 MΩ

Resolution: 0.1 or 0.01

Conductivity: 1 μS/cm to 2 S/cm

Display Mode: Continuous, average or hold

Display Type: 2 lines with 16 characters LCD

Cell Constant: 0.1

Output Detail: 2 N.O. (1A/240 Vac) on/off alarm or PWM; 4 to 20 mA for PID control or retransmission

Data Interface: RS485 Modbus

Supply Voltage: 90 to 240 Vac

Housing Material: Aluminum, ABS

Insertion Length: 90 mm

Measurement Type: Conductivity

Construction Type: Heavy Duty

Electrical Output: 5 Outputs (4-20 mA, 2 Normaly open Relay)

Enclosure Ratings: IP68, NEMA Type 4

Power Consumption: 3.5 VA

Galvanic Isolation: 2000 Vac

Additional Features 1: Anti-Corrosion Treatment: Finished with electrostatic epoxy paint

Process Connection Size: 3/4 in

Process Connection Type: NPT Male

Conductivity Measurement: 0.1 to 20000 μS

Process Temperature Note: Automatic or Manual Temperature Compensation: 0 to 100°C (32 to 212°F) Temperature Compensation: NTC-R typical 5 Ω at 25°C (77°F

Process Temperature, Max: 200 °C

Process Temperature, Min: 0 °C

Operating Temperature, Max: 40 °C

Operating Temperature, Min: 5 °C

Process Connection Material: 316 Stainless Steel

Conductivity Measurement Note: 0.1 µS to 20 mS, K = 0.1, 0 to 200°C (32 to 392°F), 10 kg/cm^2