Nagman MPC-P-B+ Pneumatic Pressure Calibrator (Bench Mounted, ±0.05% F.S)

Ranges: -0.85 to 2 / 7 / 10 / 20 / 35 / 40 / 60 bar

Accuracy: ±0.025% F.S.

Temperature Compensation: 0 to 50°C (Automatic)

Resolution: Minimum 5 digits

Display: Large Graphic Display

Engineering Units: Kg/cm2, Bar, mBar, PSI, mH2O, mmH2O, cmH2O, inH2O, ftH2O, mmHg, inHg, Atm, Mpa, Kpa, Pa

mA Input:

+ 50mA (Active Loop) & 25mA (Passive Loop)

+ Load Resistance : 800Ω

Volt Input: 0 to 30V DC

Resolution (mA / V): 0.001

Pressure Switch Test: Maximum 5V DC (approx.)

Over Pressure Alarm: 120% FS (Audio / Visual)

Battery: Rechargeable Battery & Charger

Low Battery Indication: Provided

Instrument Dimension: 260 x 130 x 105 (L x B x H)

Instrument Weight: 1.5 Kg

-Standard Delivery:

Pressure Indicator with matching Hand Pump

Set of Adaptors (BSP & NPT)

Test Leads & Seals Kit

Hose with End Fittings

External Battery Charger

RS-232 Computer Interface

Carrying Case

Calibration Certificate from NABL Accredited – as per ISO/IEC 17025:2005 Laboratory

Instruction Manual

-Optionals:

“Calpress” Calibration Software

*Panel Mounted Model with External Pressure Module(s)

Internal Sensor Ranges & Other Specifications (as in Bench-top Models)

EPM Ranges:

+ Pneumatic -0.85 to 2 / 7 / 10 / 20 / 35 / 40 Bar

+ Hydraulic: 0 to 70 / 100 / 200 / 400 / 600 / 700 Bar

EPMs: 2 / 3 / 4

Accuracies: ±0.05% F.S. / ±0.025% F.S.

Mounting: Panel Mounted (19” Rack Size)

Dimensions: 350 x 185 x 178 mm (L x B x H) – Typical for 3 EPMs

Datasheet