Nagman H6600 Hydraulic Dead Weight Tester (700 Bar, ±0.025% rdg)

Ranges: 35 / 70 / 100 / 160 / 350 / 600 / 700 Bar

Piston: Single / Dual

Standard Accuracy: ±0.025% of Reading

Traceability: International Standards

Weights: Non-Magnetic Stainless Steel

Pressure generation: Thro’ Priming Pump & Screw Ram

Standard Corrections: Gravity : 9.80665 m/s2* / Temperature : 20°C / Air Density : 1.2 Kg/Cm2

Weight (approx.): Instrument : 19 Kg. ; Weight Sets : 8 to 33 Kg.

No. of Weights: 12 to 15

Instrument Dimensions: 530 x 325 x 230 mm (L x W x D)

Operating Fluid: Oil

DWTCal Software: Optional

PCU: Tungsten Carbide Steel Piston & & Matching Hardened Cylinder

Remarks: Issued by NABL ISO/IEC 17025:2005 Accredited Lab

Standard Delivery: Basic Instrument, Full set of Adaptors consisting of 1/8”, 1/4″, 3/8”, 1/2″ BSP (Set of NPT Adaptors available on request) Calibrated S.S Weight Sets, Spirit Level, Pointer Puller / Punch, Operating Fluid (500 ml), Dust Cover, Wooden Carrying Case (for Weight Sets), Calibration Certificate from NABL Accredited Laboratory (as per ISO/IEC 17025:2005), Instruction Manual

Optionals: Right angled Adaptor / Two Gauge Adaptor, Conversion Weight Sets to convert from one unit of Pressure to another, Incremental Weight Sets for smaller increments of Pressure, DWTCal Calibration Software, Motorized Version

Datasheet