Mettler Toledo S8-Biotech kit pH/mV and Ion Meter (-2.000 ~ 20.000 pH)

Model: Seven2Go pro S8- Biotech kit

Manufacturer: Mettle Toledo-Switzerland

Origin: China

Specifications

- pH:

Measuring range: -2 ... 20 pH

Resolution: 0.001 / 0.01 / 0.1

Accuracy: ± 0.002

- ORP, Redox:

Measuring range: –2000 ... 2000 mV

Resolution: 0.1 / 1

Accuracy: ± 0.1

Unit of calculation: mV, rel. mV

- Ion:

Measuring range: 1.00e -09 ... 9.99e +09

Resolution: 3 or 4 indicators (auto-range)

Accuracy: ± 0.5%

Measuring units: mg / L, mmol / L, mol / L,%, ppm, pX

- Temperature:

Measuring range: –5.0… 130.0 ° C (ATC)

–30.0… 130.0 ° C (MTC)

Resolution: 0.1 ° C

Accuracy: ± 0.2 ° C (within 0 ... 50 ° C)

± 0.2 ° C (in the remaining range)

- Calibration (pH):

Calibration point: 5 points

The set of calibration buffers has been pre-installed: 4 groups

Users can manually install calibration buffers as required

Automatically identify calibration buffers

Calibration method: Linear, segmented

- Calibration (Ion):

Calibration point: 5 points

Ion calibration solution can be installed by the user: 1

Calibration method: Linear, segmented

- Measurement specifications:

Endpoint recording function (endpoint): Automatic / Manual

Allow recording endpoint (endpoint) over time

Notification by audio signal / display when the value reaches the end point (endpoint)

- Storage / data security:

LED signal above the screen, warning about the reliability of the device measured

The ISM function identification of the electrode is displayed on the screen

Allow updating time

Choose working level (Expert, Routine, Outdoor)

Memory: 200 results

Previous calibration results can be reviewed

Allow setting ID for each model

Alarm function when the usage limit is exceeded (user can

installable)

You can install a security PIN

- Connection:

Electrode connector: BNC (1012Ω) / RCA (cinch) / 2 mm banana

Connection port (printer, computer ...): Micro-USB (USB Device)

- Other parameters:

Machine dimensions: 222 x 70 x 35 mm

Weight: 290g

Power source: 4x 1.5 V AA or 1.3 V NiMH or USB

Working time: 200 ... 250 hours

Display: Graphic LCD display

Delivery contents:

- Main model of Seven2Go pro S8

- 4 AA Batteries

- Electrodes holder

- LabX direct pH software

- Sample bottles

- USB cable

- Cable connecting electrode

- pH measurement electrode, model: Inlab Expert Go - ISM

- pH standard solution, package type (4.01, 7.00, 9.21, 10.00)

- Certificate of the company

- User manuals

- Housing