MOTWANE COMPAC 40 Cable Fault Locating System

Impulse Mode: 

Voltage range in kV: 0-4 / 0 - 8 / 0 - 16

Energy (at each range) in Joules: 2000

Single Impulse: Yes

Selectable auto frequency per minute: 40/20/10

ARC module: Yes

DC Test Mode: Yes

Voltage range in kV: 0 - 20

Current in mA: 20

Burn Current in mA (Optional): 200 @ 5kV; 100 @ 10Kv; 50 @ 20Kv

Sheath Test (Optional): Yes

Voltage in kV: 0 - 8

Current in mA: 50

Prelocator: 

Maximum measuring range (KM ): 160

Prelocation modes: TDR , ICM , SIM/MIM , Decay

Resolution: 0.4m

Sampling rate: 400MHz

Pulse Width: 20ns - 10µs

Pulse Amplitude: 65V

VOP (V) m / µs: 20 - 300

Output Impedance: 5 - 100 ohms

Input signal gain in dB: 0 - 100

Display: Colour Tablet - 10 inch - Touch

No of records storage memory: > 1000

Communication interface: USB

Control: Touch

Internal battery: Li-ion - 7.4V/6000 mAh

Battery operation fully charged: 8 hrs

Battery charger : 110 - 220V AC - 50Hz , 8.4V/3A DC

General Parameters : 

Input Power Supply: 230V AC ± 10%

Power Frequency: 50Hz or 60Hz ± 5%

Operating temperature: -10°C to +55°C

IP rating : 21

Impulse: 4kV/1000J (Optional) only applicable for COMPAC 40 and 40D & Not Applicable for Compac 20 and 20D

Approximate Weight in KG: 190

Approximate size (LxWxH):  600 X 600 X 1000 mm 

Standard Accessories

50kV High Voltage cable in meter

10 Meter for HV, Mains and Earth Meter.

Mains cable in meter

Earth cable in meter

Rexin cover