MMF M208A 8 Channel IEPE Conditioner (8 channel, 0.1~100kH)

Gain: 0.1 .. 1000, incremental

Frequency range: 0.1 Hz .. 100 kHz

Readout display: 4 digits; RMS or peak; 1 s multiplex; with mechanical unit

TEDS support: automatic transducer sensitivity normalization

Ethernet: embedded web server hosts HTML page for readout and setup, Example: /td>

RS-232 Interface: master and slave interface for PC control of up to 8 units by supplied control software or ASCII command set

Relay output: 1 relay with adjustable threshold for each channel

High pass filter modules: FB3- 3 / 5 / 10 / 30 / 50 / 100 / 300 / 500 / 1000 Hz (Butterworth, 2nd order)

Low pass filter modules: FB2- 0.1 / 1 / 3 / 5 / 10 / 30 / 50 / 100 kHz (Butterworth, 4th order)

Integrator modules: single integrator 3 - 1000 Hz (FBV) and double integrator 5 - 200 Hz (FBD)

Connectors: 8 BNC inputs; 8 BNC outputs; shared BNC output; Sub-D output

Power supply: 10 - 28 VDC; mains plug adapter 115 / 230 VAC

Operating temperature range: -10 ... 50°C (15 ... 120°F)

Dimensions without connectors; Weight: 483x44 (1HU)x124 mm; 19x1.7x4.9 in; 3.75 lbs

Accessories:

Supplied accessories: Mains plug adapter PS1600; RS-232 daisy chain cable (M208A); Ethernet cable (M208A)

Order separately: for each channel 1high pass module (FB3-...Hz) and 1 low pass module (FB2-...kHz), alternatively instead of filters: single integrator module (FBV) or double integrator module (FBD)

Datasheet