MICROTEST 6330-5 Precision Impedance Analyzer (10Hz~3MHz)

Test Frequency:10Hz ~ 5MHz

Minimum Resolution:100mHz, 6-bit Frequency Input

Accuracy:7 ppm±100mHz

Basic Accuracy ± 0.08%

AC Measurement:

Test Signal Voltage Level 10mV - 2Vrms

Voltage Minimum Resolution 1mV

Accuracy ALC ON：6％ * Voltage ± 2mV

ALC OFF：10％ * Voltage ± 2mV

Test Signal Current Level:200µA - 20mArms

Current Minimum Resolution 10µA

Accuracy:ALC ON：6％ * Current ± 20µA

ALC OFF：10％ * Current ± 20µA

Test Time (The fastest) < 3mS

Output Impedance: 25Ω/100Ω, switchable (Nominal value)

Parameters |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR、ε and μr

Measurement Mode:

Meter mode, Graphic scanning, Multi-steps mode

Calibration:Open Circuit/ Short Circuit/Load Calibration

Measurement Circuit:Series/Parallel

Multi-steps Mode:50 groups of Multi-steps setting (Each group contains up to 15 steps)

PC LINK / CPK:Option

Flash Memory:Built-in flash for setting 100 set documents

USB:LCR setting documents, BMP graphics, Test result data

Interface :I/O Interface Handler

Serial Interface USB、RS232

Parallel Interface GPIB

Display: 7.0”TFT, 800x480 Color Screen

Temperature: 10℃ ～ 40℃ Humidity: ≦80%

Power Supply: Voltage 90V ～ 264Vac

Frequency 47Hz ~ 63Hz

Power Consumption :Low power consumption: Maximum 30W (Nominal value)

Dimension (W*H*D): 336x147x340 mm

Weight: 3 kg

Standard Accessories:Test Fixture (FX-000C19)

Optional Accessories:

Test Fixture (FX-0000C6),Kelvin Clip Leads with BNC Box (F423906A)

BNC Test Leads (F663001A/B/C), Dielectric Material Test Fixture (FX-0000C7)

Liquid Dielectric Material Test Fixture(FX-000C20)

Magnetic Material Test Fixture (FX-0000C8) Test Fixture (FX-0000C9)

Bottom Electrode SMD Test Fixture (FX-000C10)

SMD Tweezers Test Leads (FX-000C11) SMD Test Fixture(FX-000C12)

Datasheet