METRIX VX 0003 Low-frequency Electric Field Testers / Meters (10 Hz to 3 kHz, 2000V/m)

DISPLAY & BUZZER
-Display on two scales of 7 LEDs : yes
-Direct display in Volt/m (compatible with standards) : yes
-Buzzer proportional to the level of the Field E : yes
-“Low battery” and “Hold” indicators : yes
COMMANDS
-Start/Stop (with automatic stop 30mn) : yes
-Measurement Hold function : yes
-Buzzer Start/Stop : yes
-Selection of measurement range : Manual
ANTENNA & REFERENCE
-Built-in “field” antenna inside the casing : yes
-Field measurement referenced to the individual : yes
-Field measurement referenced to earth : yes
MEASUREMENT
-“RMS” electric fi eld intensity in V/m : yes
- Sensitivity & Accuracy
+ 2 sensitivity ranges (compatible with standards) : 5 to 100 V/m ; 100 to 2,000 V/m
+ Accuracy (in “laboratory” conditions) : ± 10% on LEDs thresholds
- Frequency Range
+ Analysis of electrical distribution, 10 Hz to 3 kHz: yes
+ Analysis of equipment connected to the mains : 10 Hz to 3 kHz
GENERAL SPECIFICATIONS
- Power : 9 V battery (included) - Battery life 60 - 80 hours - Automatic shutdown (30 min)
- Safety Protection : Single earth terminal / Protected reference contact
- Metrology: Metrological monitoring available via the Chauvin Arnoux / AEMC network
- Mechanical specifi cations IP65 protection
- Dimensions: 63.6 x 163 x 40 mm
- Weight: approx. 200g with battery

State at delivery: delivered with a 5 m earth cable (HX0103), socket tester, belt bag (HX0104)

Datasheet

Manual