Memmert IPP1060 Peltier-cooled incubator (1060L)

Volume: 1060 liters

Interior dimension: 1040W x 1200H x 850D mm

Exterior dimension: 1224W x 1661H x 1107D mm

Stainless steel grids (standard): 2

Max. number of grids: 14

Working temperature range: 0 (at least 20 below ambient temperature) to 70°C

Setting accuracy: 0.1°C

1 Pt100 sensor DIN class A in 4-wire-circuit

Language setting: German, English, Spanish, French, Polish, Czech, Hungarian

ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display

Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function SetpointWAIT: the process time does not start until the set temperature is reached

Calibration: three freely selectable temperature values

Adjustable parameters: temperature (Celsius or Fahreheit), programme time, time zones

Convection: forced ventilation by Peltier fan

Programme stored in case of power failure

Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter

Autodiagnostic system: for fault analysis

Interface: Ethernet

Enery-saving Pletier heating/cooling system integrated in the rear

Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

Door: fully insulated stainless steel door with 2-point locking, inner glass door, two leaves

Internal data logger with a storage capacity of at least 10 years

Voltage: 230 V, 50/60 Hz

Electrical load: approx. 1500 W

Ambient temperature: 16 – 40°C

Humidity: max. 70% rh, non-condensing

Installation: 4 feet; mounted on lockable castors

Accessories:

+ Calibration certificate for 10°C and 37°C (Memmert supply)

+ Stainless steel grid, 2 pcs

+ Manual

Datasheet