MEMMERT IN260 plus Incubator (256 L)

Volume: 256L

Interior dimensions: Width 640 x Height 800 x Depth 500 mm

Exterior dimensions: Width 824 x Height 1183 x Depth 684 mm

Number of supply trays: 2

Maximum number of tray grooves: 9

Operating temperature range: Minimum 50°C above ambient temperature up to 800°C

Setpoint resolution: 0.10°C

Temperature sensors: Uses 2 Pt100 temperature probes according to DIN Class A standard, used for displaying operating temperature and alarm

Control panel (ControlCOCKPIT): Dual display. Multifunctional PID microprocessor controller with two high-resolution color TFT screens

Language settings on ControlCOCKPIT panel: German, English, French, Spanish, Polish, Czech, Hungarian

Adjustable countdown timer: From 1 minute to 99 days

HeatBALANCE function: Used to adjust the heating level to balance the top and bottom of the drying chamber within an adjustable range of -50% to 50%

SetpointWAIT function: Time is activated when the temperature reaches the set temperature

Calibration: Freely selectable for 3 temperature values

Adjustable parameters: Temperature (0°C or 0°F), air convection door position, time program, time zone

Sterilization: Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber, no sterilization for samples

Natural air convection

Pre-heated air mixture adjustment: By adjusting the air intake cover by 10%

Program storage in case of power failure

Programs: AtmoCONTROL software on USB memory stick used for programming, managing, and transferring programs via Ethernet or USB interface

ControlCOCKPIT control panel: USB port for loading programs, reading values, activating user index setup functions

Data display: Display of saved data on the ControlCOCKPIT control panel (up to 10,000 values equivalent to about 1 week)

Ethernet interface: Located at the back of the device for reading recorded data, loading programs, and online recording

Temperature control: Mechanical temperature limit device TB, protection class 1 according to DIN 12 880, automatically shuts off when the temperature exceeds approximately 20°C above the set temperature, overheat control TWW, protection class 3.1, or adjustable temperature limit TWB, protection class 2, selectable on the screen.

Additional temperature control: Integrated over and under temperature control "AFS," automatically following the setpoint value within a predefined tolerance range; alarm in case of over and under temperature, heating function is cut off in case of over-temperature, cooling function automatically cuts off in case of under temperature

Microprocessor-controlled PID with self-diagnosis system

Alarm: Visual and audible

Door: Fully insulated stainless steel door with 2 locking points, inner glass door

Housing structure: Scratch-resistant, hard, and durable stainless steel, galvanized steel at the back.

Internal memory: Capable of storing data for at least 10 years

100% air safety compliance (100% AtmoSAFE)

Connections: Ethernet LAN, USB

Power supply: 230 V, 50/60 Hz

Power consumption: Approximately 1700 W

Ambient temperature: 5 – 40°C

Humidity: Maximum 80% rh, non-condensing

Included Accessories:

Calibration certificate at 370°C (provided by Memmert)

Stainless steel mesh trays, 2 pieces

USB with AtmoCONTROL software

User manual

datasheet