iKAM iK-3CP70TD1200 Precision Programmable Variable Frequency Power Supply (120KVA)

Capacity: 120KVA

Rated Current 120V: 1000A

Rated Current 240V: 500A

AC input: Three phase four wire+PE

AC output: Single phase two wire

Input power supply: 10KVA and below: single-phase 220V ±10%, 50Hz ±5Hz, 10KVA or above: three-phase 380V±10%, three-phase four wire+ground wire; 50Hz±5Hz

Output voltage range: Low 1~150.0V, High 1~300.0V

The output frequency: is adjustable from 45~400Hz, with a step size of 0.1Hz. Quick keys: 50Hz; 60Hz

Frequency stability: ≤ 0.1%

Voltage stability: ≤ 1%

Distortion: ≤ 2% (THD)

Peak coefficient: 1.41+0.10

Source voltage effect: ≤ 1%

Load effect: ≤ 1%

Efficiency: ≥ 90% (≥ 80% for capacities of 3kVA and below)

Frequency display shows: 0.1% reading with a resolution of 0.1Hz

Voltage display: +(1% reading+0.1% range), resolution 0.1V

Current display: ±1% reading+0.1% range, resolution: 0.001A/0.1A

Power display: +(1% reading+0.1% range), resolution 0.1W/0.1kW

Power factor display: ± 0.1, resolution 0.001

Preset function: output voltage, output frequency, and output current upper limit

Quick function: commonly used voltage and frequency conversion, M1 and M2 memory groups

After the alarm function: protection device is activated, it emits an alarm (sound and light) signal and displays a fault code

Overload capacity: 1.0Ie < I output ≤ 1.1Ie, with a delay of 15 seconds to cut off the output, 1.1Ie ≤ I output ≤ 1.2Ie, with a delay of 5 seconds to cut off the output

Overheating protection: power device temperature greater than 85°C ±5°C

Communication interface: RS-232C/RS-485 (optional)

Shell protection level: IP20

Chassis structure: desktop (below 3kVA), cabinet (upright) (with wheels) (5KVA and above)

Working environment: temperature: -10 ℃~40 ℃ Humidity: 10%~90% (no condensation at 25 ℃), altitude ≤ 2000m