LDetek LD8001+B1-C2-D2-E1 PPB Ultra Trace Nitrogen Analyzer (Argon, 0 – 50 ppb/0-500 ppb/0-1000 ppb)

Detector Type: 

Plasma Emission Detector design based on a Duty Cycle Controlled System.

Integrated oscillating sub ppb system.

Sample gas: Argon

Output: A ( Alarm option)

Serial Communication: Serial Interface - Modbus RS232

Range: 0 – 50 ppb/0-500 ppb/0-1000 ppb

Repeatability & Accuracy: < +/- 1% (refer to design report)

Response Time: < 1 minute

Standard Features: 

Manual or auto-ranging (user selectable)

Microprocessor controlled

Touchscreen 7 inches HDMI TFT display

Self diagnosis system with auto-resolve alarm

Alarm historic: 

Safe calibration procedure to avoid any bad calibration

Digital outputs for remote monitoring: (all dry relay contacts)

System status (1 output)

Range in use (3 output)

Calibration in use (1 output)

Gas Connections: 

Sample: 1/8” face seal fittings

Vent: 1/8” compression fitting

Calibration Gas: 

Zero: Integrated in the unit with LDP1000

Span: 1000 ppb N₂

Sample Flow Requirements: 150 sccm at 15psig to 500 sccm at 30 psig

Sample Gas Operating Pressure: 10-30 psig

Operating Temperature: 10 °C to 45 °C (must be stable)

Supply: 220 V

Power Consumption: Maximum 110 watts

Drift/Stability: < +/- 0.01% (refer to design report)

Weight: 37 lbs (17 kg)

Enclosure Type: 3U rackmount

Ingress Protection: IP20 in accordance with IEC 60529

Enclosure Finish: RAL7030 powder coat

Certification

In compliance with EMC directives: IEC 61000-4-3: 2020, IEC 61000-4-6: 2013, IEC 61000-4-2: 2008, IEC 61000-4-4: 2012, IEC 61000-4-5: 2014 A1: 2017, IEC 61000-4-8: 2009, IEC 61000-4-11: 2020 for immunity & CISPR 32: 2015 A1: 2019, FCC Part 15, Subpart B: 2021, CISPR 32: 2015 A1: 2019, FCC Part 15, Subpart B: 2021 for emissions.

Datasheet

Brochure