LANGER EMV-Technik ICR HV250-6 set Near-Field Microprobe (2.5 MHz - 6 GHz)

Technical parameters

Frequency range: 2.5 MHz ... 6 GHz

Resolution: 110 µm

Internal diameter: 250 µm

Scope of delivery

1x ICR HV250-6, Near-Field Microprobe 2.5 MHz - 6 GHz

1x BT 706, Bias Tee for Langer probes

1x SMA-SMA RA, Cable SMA-SMA, right angle

1x ICR-C, ICR Certificate

1x ICR Corr, Correction Curves ICR / USB

1x NT FRI EU, Power Supply Unit

1x ICR case1, System Case

Short description

The near-field microprobe is designed for a high-resolution measurement of electrical near fields. With the ICR E probe the following measurements can be performed:

Surface Scan via IC according to IEC 61967-3

Volumenscan via IC

Pin Scan

The measuring electrode at the ICR RF probe head is horizontally aligned to the measurement surface.

A preamplifier is integrated into the probe housing and powered by the Bias-Tee.

The ICR near-field probes undergo a quality check before they are delivered. Different reference setup measurements are performed and resulting correction lines are generated. Two different correction lines are determined – a standardized correction line and an E-field correction line.

Attention: Due to its construction, the ICR probe is sensitive to shock and comes with a protective cap for transport and handling.

Datasheet

Overview