Labstac WO115 Basic RO Water System (30L/h)

Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)

Temperature: 5-45°C

Pressure: 1.0-4.0 Kgf/cm²

Flow Procedure**: PF+AC+RO+AC

Ion rejection rate: 96%-99% (New RO membrane)

Organic rejection rate: >99% (when MW>200 Dalton)

Particles and bacteria rejection rate: >99%

Output(25°C)****: 30 L/hrs

Pure water outlet: RO water

DimensionLxWxH: 410×400×420 mm

Weight: 20 kg

Standard configuration: Main body (Including 1 set of cartridges) + TDS pen+ accessory bag + built-in 10 liters tank

Power Consumption (W): 72 W

Power Supply: AC110-220 V, 50/60 Hz

Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span.

**PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange.

***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.

Datasheet