KYOWA PCD-400B Strain Data Logger (4CH)

Applicable Sensors: Strain gages, Strain-gage transducers

Input Channels: 4

Synchronous Measurement: Up to 4 units by 16 channels

Applicable Gage Resistance: Quarter bridge system (2-wire or 3-wire): 120 Ω;  Half and full bridge systems: 120 Ω to 1000 Ω

Input Connectors: 37-pin D-sub connector

Bridge Power Supply: AC 2 V rms

Gage Factor: 2.00 fixed

Balance Adjustment: Resistance: Within ±2% (±10000 μm/m) ; Capacity: Within 5000 pF

Balance Adjustment Methods: Resistance: Pure electronic auto balance method ; Capacity: CST method (Automatic tracking)

Nonlinearity: Within ±0.1%FS

Measurement Range: 200, 500, 1000, 2000, 5000, 10000, 20000 μm/m, 7 steps. ;  Accuracy: within ±0.5%FS

Frequency Response: DC to 200 Hz; Deviation: within ±10%

Sampling: Sampling Frequencies : Max. 10 kHz (Synchronous sampling of 4 units 16 channels)

LPF: 

Transfer Characteristics : 2nd order Butterworth 

Cutoff Frequency : 10, 30, 100 Hz, and FLAT -4 steps 

Amplitude Ratio at Cutoff Point : -3±1 dB 

Attenuation : -12±1 dB/oct. 

A/D Resolution: 24 bits

Holding Setting Conditions: 0.7 A or less (13 VDC)

TEDS: Loading function from the TEDS sensor (Applicable input adaptors UI-10A and UI-11A) ; CH name writing function (For the manufacture ID: KYOWA only)

Interfaces: USB2.0 (Compliant to the High-Speed, USB3.0 port supported)

Stability: 

Temperature 

Zero point: within ±0.2 μm/m per ºC 

Sensitivity: within ±0.05%/ºC 

Time 

Zero point: within ±1 μm/m/8h.  

Sensitivity: within ±0.3%/8h. 

Withstand Voltage 

Operating Temperature/Humidity: 0 to 40ºC, 20 to 85%RH (Noncondensing)

Vibration Resistant: ±29.42 m/s2 (3 G), 5 to 200 Hz, (12 cycles for each axis, 10 minutes/cycle)

Power Supply: DC 11 to 16 V; Connector: RM12BRD-4PH (Hirose)

Current Consumption: 0.7 A or less (12 VDC)

Dimensions: 210 W x 35 H x 157.5 D mm (Excluding protrusions)

Weight: Approx. 700 g