KOMEG KMT-100R Temperature Test Chamber (-70°C~+150°C, air cooled)

Volume About 100L

Inner size : W500mm*H400 mm*D500 mm

Outer size : W 700 × H 940 ×D 1408 mm((Not including the protruding part))

Tips: For external dimensions, please confirm the three views accordingtothefinal design!

2Floor area About : 0.98m2（Confirm after signing the contract）. The main technical parameters

Page 3Total 12www.komegtech.com3.1 Test Conditions Equipment cooling method: Air-cooled

Measured at water temperature +25 ° C, Temperature measurement comply with related regulation of GB/T2424.5/IEC60068 -3-5 standard; Sensors placed in the air outlet. 3.2 Temp. range -70℃ ～ +150℃

Temp deviation : ±2.0℃

Temp Uniformity: ±2.0℃

Temp fluctuation: ≤±0.5℃

Heating and cooling rate :

Heating rate: -70℃ ～ +150℃，full range average 3C/Min (no load )

Cooling rate:

From +20℃～-70℃，full range average approx 1C/ min (noload)

Max load No

Noise ≦75 (dB)（The noise detection device is measured 1maway fromthedoorof the device）

Meet the test standard GB-2423.1-2008(IEC68-2-1) Test A: Low Temperature Test

GB-2423.2-2008(IEC68-2-2) Test B: High Temperature Test

GJB360.8-2009(MIL-STD.202F) High Temperature Life Test

GJBl50.3-2009(MIL-STD-810D) High Temperature Test

GJBl50.4-2009(MIL-STD-810D) Low Temperature Test