JINKO JK824 Handheld LCR Digital Bridge Meter (100Hz, 120.048Hz, 1kHz)

Measurement Range:

L: 0.1μH – 999.9H

C: 0.1pF – 999.9mF

R, X, Z: 0.0001Ω – 99.99MΩ

D: 0.0001 – 9.999

Q: 0.0001 – 999.9

θd: -179.99° – 179.99°

θr: -3.1416 – 3.1416

%: -999.9% – 999.9%

Primary Parameters: C, L, R, Z, AUTO

Sub Parameters: OFF, AUTO, D, Q, ESR, θr, θ°, X

Display: 50000 readers

Basic Accuracy: 0.2%

Equivalent Mode: Serial, Parallel and AUTO

Ranging: Auto and Manual

Speed:

Slow: 1.5 times/second

Fast: 4 times/second

Test Frequency: 100Hz, 120.048Hz, 1kHz

Test Signal Level: 0.6 Vrms, Accuracy: 10%

Signal Source Resistance: 100Ω

Correction: Open and short correction

Comparator: Primary parameter percentage, Beep

Test Terminal: 5 terminals and 3 terminals

Interface: USB-HID

Features:

Display: TFT-LCD Display, 2.8 inch with touchscreen

Brightness: 30%, 50%, 70%, 100%

Power-save: Adjustable brightness and auto power off time

Power:

Battery: Rechargeable Li Battery: ATL805

AC Adapter: JKL909, 90V~250VAC, 9VDC, 1A

Max power: 0.9W

Standby Current: 50μA max

Battery Working Time:

8h @ 100% brightness

11h @ 50% brightness

14h @ 30% brightness

Charge Time: About 2h

Lower Brightness Auto Power Off: 5min/10min/20min/30min/OFF (Powered by battery)

Auto Power Off: 5min/10min/20min/30min/OFF (Powered by battery)

General:

Temperature: 0°C~40°C

Humidity: ≤ 90% RH

Altitude: 2000m

Storage Temperature: -10°C~70°C

Weight: 350g

Safety and Electromagnetic Compatibility:

IEC 61010-1:2001

IEC 61326-2-1:2005

Manual