INSIZE LDS-N100-RS Laser displacement sensors (NPN + RS485; 65-135mm)

Code NPN + RS485: LDS-N100-RS

Detection method: diffuse reflection

Basic (center) distance: 100mm

Detection range (F.S.): 65-135mm

Full scale: 70mm

Repeat accuracy: 70μm

Linear accuracy: ±0.2% F.S.

Temperature drift characteristics: ±0.03% F.S./°C

Light source: medium: red diode laser, wavelength 655nm; output power <1mW; laser class:IEC Class 2

Light spot diameter: Ø120μm

Output:

Switch mode: NPN open collector, ≤50mA/DC 24V, residual voltage<1.5V

Analog: analogue voltage: 0~5V (alarm: 5.2V), analogue current: 4-20mA (alarm: 0mA), Chinese display switchable

Operation: Light.on/Dark.on selectable

Response time: 1.5ms/5ms/10ms, switchable

Power supply: DC12-24V

No-load current: <30mA (at supply voltage 24V DC), <60mA (at supply voltage 12V DC)

Indicator light: output indicator: yellow, power indicator: green

Protection circuit: reverse polarity protection/surge protection/short circuit protection

Protection level: IP67

Withstand voltage: AC1000V, 50/60Hz, 1min

Vibration resistance: 10-55Hz (period 1min), double amplitude 1.5mm, 2H in each X/Y/Z direction

Impact resistance: 500m/S^2 (approx. 50G), 3 times each in X/Y/Z direction

Insulation impedance: 50megaohm or more (DC500V megohmmeter)

Material:

Cover: aluminum alloy

Lens: PMMA

Guidewire: PVC (polyvinyl chloride)

Connection:switching: lead-in type (4-pole, standard cable length 2m), analog: lead-in type (5-pole, standard cable length 2m)

Ambient illumination: incandescent lamp ≤ 3000lux, sunlight ≤ 20000lux

Ambiance temperature: operation: -10~45°C, storage: -20~60°C(non-freezing)

Ambience humidity: operation: 35~85%RH, storage: 35~85%RH (non-condensing)

Weight: 85g (including cable)

STANDARD DELIVERY

Main unit: 1pc

Mounting bracket: 1pc

Cable: 1pc

■ High accuracy, non-contact measurement, high speed response,

multiple measurement modes, environmental adaptability, programmable control, rich data output interface and easy maintenance.

■ Can be used in automated production lines, robotic arms, packaging equipment, printing equipment, medical equipment etc.