HK Instruments Siro-MOD-CO2 Indoor Air Quality Transmitter (CO2: 400–2000 ppm)

Measurement ranges:

+ CO2: 0–2000 ppm / 400–2000 ppm (selectable via jumper)

+ VOC: CO₂eq: 400–2000 ppm; TVOC ppm: 0–30.0 ppm; TVOC µg/m3: 0–10000 µg/m3; IAQ index: 1–5 (UBA rating)

+ PM1/PM2.5/PM10: 0–50 μg/m³ / 0–500 μg/m³ (selectable via jumper); IAQ index: 1-5 (WHO rating)

+ Temperature: 0...50 °C

+ Relative humidity: 0–100 %rH

Communication: RS-485 Modbus (RTU)

Accuracy:

+ CO₂: ±40 ppm + 3 % of reading (typical), additional ±60 ppm for first weeks

+ Relative humidity: ±2.2 % rH (typical at 20 °C, 30 % rH)

+ Temperature: ±0.4 °C (typical at 20 °C)

+ VOC: ±15 % of reading (typical)

*VOC sensor is tuned for typical IAQ Mix of 22 VOCs as defined by Mølhave et al. (1997)

+ PM:

0…100 μg/m3:

PM2.5: ±15 μg/m3(at 25 ⁰C ±5 ⁰C)

PM1/PM10*: ±25 μg/m3 (at 25 ⁰C ±5 ⁰C)

100…1000 μg/m3:

PM2.5: ±15 % (at 25 ⁰C ±5 ⁰C)

PM1/PM10*: ±25 % (at 25 ⁰C ±5 ⁰C)

*PM1 and PM10 values are calculated from PM2.5 measurement reading with the default particle distribution.

Measuring elements:

+ CO2: Non-dispersive infrared (NDIR)

+ VOC: Complementary Metal Oxide Semiconductor (CMOS)

+ PM: Laser-based light scattering particle sensing

+ Temperature: Integrated to CMOS

+ Relative humidity: Thermoset polymer capacitive sensing element

Measuring units:

+ CO2: ppm

+ Relative humidity: % rH

+ Temperature: °C

+ VOC CO2eq: ppm

+ TVOC: ppm, μg/m3

+ PM1/2.5/10: μg/m3

Calibration (CO2): Automatic self-calibration, ABC LogicTM

Supply voltage: 24 VDC/VAC ±10 %

Output signal 1–4: 0...10 V (optional 2...10 V / 0...5 V, display or configuration tool required); Optional 4...20 mA

Linear to selected measurement (CO2, VOC, PM, rH or Temp)

Operating temperature: 0...50 °C

Protection standard: IP20

Noted:

CO2 = Carbon dioxide sensor

Summary

Datasheet

Manual