HINOTEK Bante904P Portable Conductivity/Dissolved Oxygen Meter (0.00 - 20.00mg/L)

Conductivity:

Measuring range: 0.01~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm

Display resolution: 0.001, 0.01, 0.1, 1

Measurement accuracy: ±0.5% FS

Calibration point: 1 to 5 points

Calibration solution: 10µS, 84µS, 1413µS, 12.88mS, 111.8mS

Temperature compensation coefficient: Linear (0.0~10.0%/°C), pure water

Reference temperature: 20/25°C

Conductivity cell constant: K=0.1, 1, 10, custom

TDS:

Measuring range: 0.00~10.00, 100.0, 1000ppm, 10.00, 200.0ppt

Display resolution: 0.01, 0.1, 1

Measurement accuracy: ±1% FS

TDS conversion factor: 0.1~1.0 (default 0.5)

Salinity:

Measuring range: 0.00~80.00ppt, 0.00~42.00psu

Display resolution: 0.01

Measurement accuracy: ±1% FS

Resistivity:

Measuring range: 0.00~20.00MΩ

Display resolution: 0.01

Measurement accuracy: ±1% FS

Dissolved oxygen:

Dissolved oxygen measurement range: 0.00~20.00mg/L

Display resolution: 0.01, 0.1mg/L, optional

Measurement accuracy: ±0.2mg/L

% Saturation measurement range: 0.0~200.0%

Display resolution: 0.1, 1%, optional

Measurement accuracy: ±2.0%

Calibration point: 1 or 2 points

Atmospheric pressure compensation range: 60.0~112.5kPa/450~850mmHg, manual

Salinity compensation range: 0.0~50.0g/L, manual

Temperature:

Measuring range: 0~105°C/32~221°F

Display resolution: 0.1°C/0.1°F

Measurement accuracy: ±0.5°C/±0.9°F

Offset calibration: 1 point, measured value ±10°C

General parameters:

Temperature compensation range: 0~100°C/32~212°F, manual or automatic

Data storage: 500 groups

Communication output: USB

Connector: 6-pin DIN, 3.5mm microphone jack

Display screen: Custom LCD display (80×60mm)

Power type: 3 AA batteries or DC5V power adapter

Dimensions: 170(L)×85(W)×30(H)mm

Meter weight: 300g

Datasheet

Manual