HILO-test PG20-14000 Surge Current Generator (14000 Ws; 8 / 20 µs ± 10 %)

Mainframe

Microprocessor controlled touch panel: 7”, capacitive

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External trigger input / output: Switch/ 10 V

Connector for external safety interlock loop and external red and green warning lamps (acc. to VDE 0104): 24 V=, 40 mA

Mains power: 230 V, 50/60 Hz

Mains synchronous triggering, phase shifting, digitally selectable: 0 - 359°, step 1°

Pulse generator section  

Max. stored energy: 14000 Ws

Peak value of charging voltage, adjustable: 0 - 20 kV, ± 2%

Charging time for max. charging voltage: < 117 sec

Waveform of impulse output current (30 – 100 kA): 8 / 20 µs ± 10 %

Impulse output current, adjustable via charging voltage: 2 - 100 kA ± 10 %

Output pulse polarity, switchable: POS/NEG

Pulse repetition rate for 100 kA: 1/117 sec

Pulse repetition rate for 40 kA (with Varistor Vv=1800V on HV output): < 1/60 sec

Current viewing resistor, built-in: 0.25 mΩ (1 mΩ), 10 MHz

Impulse current output terminals: M12 bolts in the test chamber

Test adapter on the output terminals: M12 bolts

Ground rod: In test chamber

Dimensions (19"-cabinet W * H * D): 560 * 1950 * 950 mm³

Weight: 265 kg

Datasheet