HILO-test PG10-12500 Surge Current Generator (12500 Ws; 10 / 350 µs ± 20 %)

Mainframe

Microprocessor controlled touch panel: 7”, capacitive

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External trigger input / output: Switch/ 10 V

Connector for external safety interlock loop and external red and green warning lamps (acc. to VDE 0104): 24 V=, 40 mA

Mains power: 230 V, 50/60 Hz

Dimensions (19"-cabinet): ca. 553 * 600 * 600 mm³

Weight: 65 kg

Pulse generator section 

The surge current generator PG 10-12500 generates impulse currents with waveform 10/350 µs and is designed for testing over-voltage protectors. Pulse current output amplitude is controlled by preset charging voltage and can be set to (0.5 - 5) kA respectively.

Peak value of charging voltage, adjustable: 0.2 - 10,000 V, ± 2%

Energy storage capacitor: 12500 Ws

Charging time for max. charging voltage: 100 sec

Waveform of impulse output current: 10 / 350 µs ± 20 %

Impulse output current, adjustable via charging voltage: 0.5 – 5.0 kA ± 5 %

Output pulse polarity, switchable: POS/NEG/ALT

Current viewing resistor, built-in: 0.5 mΩ, 2 MHz

Max. pulse repetition rate: 1/60 sec

Dimensions (19"-cabinet W * H * D): ca. 600 * 2000 * 800 mm³

Weight: 265 kg

Datasheet