HILO-test PG 10-7000 Surge Current Generator (10/350 µs; 2.5 kA)

Main Unit, Control

Microprocessor control, display with LCD module: 8×40 characters

Optically isolated interface for remote control of the generator: built-in

Parallel printer interface for online logging: D-25 pin

External trigger input: 10 V at 1 kΩ

External trigger output: 10 V at 1 kΩ

Connections for external safety circuit: 24 V DC

External red and green warning lamps according to VDE 0104: 230 V, 60 W

Mains connection: 230 V, 50/60 Hz

Construction: 19" cabinet on mobile base, W × H × D approx. 553 × 800 × 1250 mm³

Weight: 240 kg

High Voltage Charger

Charging voltage adjustable: 0.2 – 10 kV ±2%

Charging capacitor: 140 µF

Maximum energy content: 7000 Ws

Charging time, max.: < 60 sec

Maximum repetition rate: 1/80 sec

Pulse-Forming Network

Short-circuit current waveform (IEC 60060-2): 10 / 350 µs ±20%

Peak current adjustable via charging voltage: 50 – 2500 A ±10%

Open-circuit voltage rise time: 1.2 µs ±30%

Polarity of impulse output, switchable: POS / NEG / ALT

High-current output (rear panel sockets): 12 mm Ø

Ground connection for earthing the device: 12 mm screw terminal

Impulse current measuring resistor, built-in: 2 mΩ, 1.0 MHz

Datasheet